Canon imageRUNNER ADVANCE C5500 Series Service Manual page 917

COPIER > OPTION > FNC-SW
FXWRNLVL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
KSIZE-SW 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
ORG-A4R 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PDF-RDCT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set Fix Film life display threshold VL
To set the threshold value to display the life of Fixing Film.
This item is used to prevent the occurrence of fixing failure caused by the continuous use of the
Fixing Film beyond its life.
When FXMSG-SW is 1, this setting is enabled.
The counter for life judgment is stored in the DC Controller. The counter value cannot be changed
and checked.
When continuing to use the Fixing Unit beyond the life of the Fixing Film
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Warning is hidden.
1: Warning is displayed when the counter for life judgment reaches the specified value. (Driving
time: 375 hours)
2: Warning is displayed when the counter for life judgment reaches the specified value. (Number
of sheets: 300000 sheets)
3: Warning is displayed when the counter for life judgment reaches the specified value. (Both
driving time and number of sheets)
0
COPIER> OPTION> DSPLY-SW> FXMSG-SW
Set of Chinese paper (K-size) support
To set to detect/display the Chinese paper (K size paper: 8K, 16K).
When using K size paper
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Go through the following: COPIER> OPTION> FNC-SW> MODEL-SZ; and if MODEL-SZ is "0: AB
configuration", this mode is enabled.
0 to 1
0: Not supported, 1: Supported
JP:0, USA:0, EUR:0, AU:0, CN:1, KR:0, TW:0, ASIA:0
COPIER> OPTION> FNC-SW> MODEL-SZ
8K paper: 270 x 390 mm, 16K paper: 270 x 195 mm
Special paper size set in DADF mode: A4R
To set the size of special paper (A4R) that cannot be recognized in DADF stream reading mode.
When picking up A4R size original from the DADF of the Inch/AB configuration models, the size
is converted into the specified size so that an image can be formed properly.
- Upon user's request
- When picking up special paper size original from DADF
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: A4R, 1: FOLIO-R
0
PDF reduction set at forwarding
To set whether to reduce the image for transmission when converting the image received by IFAX
into PDF for e-mail/file transmission.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Following the current setting, 1: Image reduction
0
903
8. Service Mode