Canon imageRUNNER ADVANCE C5500 Series Service Manual page 900

COPIER > FUNCTION > CLEAR
CNT-DCON 1
Detail
Use Case
Adj/Set/Operate Method
MMI 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Supplement/Memo
MN-CON 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
Supplement/Memo
CARD 1
Detail
Use Case
Adj/Set/Operate Method
Caution
ALARM 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Clear of DC Controller service counter
To clear the service counter counted by the DC Controller PCB.
When clearing the service counter counted by the DC Controller PCB
Select the item, and then press OK key.
Clear Settings/Registration setting VL
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the Settings/Registration setting values.
- Preferences (excluding values for Paper Type Management Settings)
- Adjustment/Maintenance
- Function Settings
- Set Destination (excluding Address Lists)
- Management Settings (excluding Department ID Management)
When clearing various setting values of Settings/Registration
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
- The setting value is cleared after the main power switch is turned OFF/ON.
- If this item is executed while a login application other than User Authentication is running, it
switched to User Authentication after reboot. Set the login application using SMS as needed.
SMS (Service Management Service): An application for management which can be used on
remote UI.
Deletion of setting values
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To delete the setting values of address lists, forwarding settings, Settings/Registration and service
mode.
For details, refer to "Backup Data List" in the Service Manual.
When initializing the setting values
1) Select the item, and then press OK key.
The machine is automatically rebooted.
2) Turn OFF/ON the main power switch.
- Output the service mode setting values by P-PRINT before execution. After execution, enter
necessary setting value.
- RAM data is cleared after the main power switch is turned OFF/ON.
- If this item is executed while a login application other than User Authentication is running, it
switched to User Authentication after reboot. Set the login application using SMS as needed.
COPIER> FUNCTION> MISC-P> P-PRINT
SMS (Service Management Service): An application for management which can be used on
remote UI.
Clear of card ID-related data
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the data related to the card ID (department).
When clearing the data related to the card ID
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
The value is cleared after the main power switch is turned OFF/ON.
Clear of alarm log
To clear alarm log.
When clearing alarm log
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
The alarm log is cleared after the main power switch is turned OFF/ON.
886
8. Service Mode