2. Removing the ITB Cover [1]
• 2 Screws [2] (to loosen)
CAUTION:
• Do not touch the surface of the ITB.
• When installing the ITB Cover, be sure to push it to the left. If the pushing is insufficient, the plate is not inserted to the
slit of the ITB Cover, which may cause the damage of the sensor.
■ Procedure
1. Be sure to check that the arrow on the ITB Sub Pressure Release Lever [1] is aligned with the triangle mark [2] on
the plate.
(If not, align the arrow on the lever with the triangle mark on the plate.)
2x
[2]
[1]
[2]
[1]
284
4. Disassembly/Assembly
[2]
[2]
[1]