Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1106

SORTER > OPTION
1SHT-SRT 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Additional Functions
Mode
Supplement/Memo
FIN-SP1 2
Detail
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
FIN-SP2 2
Detail
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
MSTP-TMG 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Additional Functions
Mode
Supplement/Memo
Amount of Change per
Unit
Set collate dvry of 1-sheet: Fin-Y1
To set ON/OFF of collated delivery operation for a sheet of paper.
When 1 is set, the collated delivery operation for a sheet of paper is not performed.
Upon user's request
Enter the setting value, and then press OK key.
The stacking condition decreases when the collated delivery operation for a sheet of paper
enables.
A sheet of paper is delivered by non-sort decreases when the collated delivery operation for a
sheet of paper disables.
0 to 1
0: ON, 1: OFF
Setting/Registration> Function Settings> Common> Paper Output Settings> Offset Jobs
The collated delivery operation for a sheet of paper works in the following condition.
The setting of a sheet of paper and a copy
This service mode is ON.
The job from a printer driver
Oddset jobs is ON.
Finisher special setting 1: Fin-H1/Y1
To execute the Finisher special settings 1.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Take necessary action in accordance with the instructions from the Quality Support Division.
00000000 to 11111111
Finisher special setting 2: Fin-H1/Y1
To execute the Finisher special settings 2.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Take necessary action in accordance with the instructions from the Quality Support Division.
00000000 to 11111111
Set of manual stpl tmg: Fin-H1/Y1
To set the duration of time before executing automatic stapling at manual staple mode.
As the value is changed by 1, the time is changed by 1 second.
+: Timing is delayed
-: Timing becomes earlier
Upon user's request
Enter the setting value, and then press OK key.
1 to 5
sec
3
Adjustment/Maintenance> Adjust Action> Time Unitil Stapling Starts in Stapler Mode
The setting of the service mode links the setting of the user mode.
1
1092
8. Service Mode