Canon imageRUNNER ADVANCE C5500 Series Service Manual page 941

■ NETWORK
COPIER > OPTION > NETWORK
RAW-DATA 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
IFAX-LIM 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SMTPTXPN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SMTPRXPN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
POP3PN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of received data print mode
To set print mode for the received image data.
This item is used to identify the cause whether it's due to image data or image processing in the
case of problem with received image.
When a problem with received image occurs
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Be sure to set the value back to 0 after recovering from the problem.
0 to 1
0: Normal print operation, 1: Print with original data without image processing
0
No. of max print lines at IFAX reception
To set the maximum number of lines for e-mail text to be printed when receiving IFAX.
Setting of this item can prevent endless printing of the attached file data in the case of receiving
an error e-mail or failure in interpretation of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail text without attached file.
When preventing endless print in the case of failure in reception
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: E-mail text not printed, 999: Unlimited
500
Setting of SMTP TX port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP transmission port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
25
Setting of SMTP reception port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set SMTP reception port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
25
Setting of POP3 reception port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set POP3 reception port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
110
927
8. Service Mode