2. Remove the All-night Power Supply PCB [1].
• 2 Connectors [2]
• 4 Screws [3]
Removing the Developing High-Voltage PCB (YMC)/Charging High-
Voltage PCB (YMC)
■ Preparation
1. Pull out the Cassette 2.
2. Open the Waste Toner Container Cover.
3. Pull out the Front Cover.
4. Remove the Left Upper Cover.
5. Remove the Left Lower Cover.
2x
4x
[3]
4)
5)
[2]
[3]
2)
275
4. Disassembly/Assembly
[1]
[3]
[2]
3)
1)