Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1025

Hide thumbs Also See for imageRUNNER ADVANCE C5500 Series:
Table of Contents

Advertisement

COPIER > OPTION > INT-FACE
NWCT-TM
2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
Amount of Change per
Unit
CNT-TYPE
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VTRNS-TO
2
Amount of Change per
Unit
■ LCNS-TR
COPIER > OPTION > LCNS-TR
ST-SEND
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-SEND
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Timeout setting of network connection
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the time to keep network connection between this machine and the PC application (keep-
alive setting).
As the value is incremented by 1, the time is increased by 1 minute.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 5
min
5
Expected PC application: Network print application, E-mail function, cascade copy, MEAP network
application, etc.
1
Display of print server ID
To display the ID of the print server being recognized by the machine.
At installation of print server
N/A (Display only)
1 to 999
1: Not yet connected, 400 to 499: EFI print server, 600 to 699: Creo print server, 700 to 799: Oce
print server
1
For R&D
1
Installation state dspl of SEND function
To display installation state of SEND function when disabling and then transferring the license.
When checking whether SEND function is installed
1) Select ST-SEND.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-SEND.
When operation finished normally: OK!
According to the setting at shipment
Trns license key dspl of SEND function
To display transfer license key to use SEND function when disabling and then transferring the
license.
- When replacing HDD
- When replacing the device
1) Select ST-SEND.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-SEND.
24 digits
1011
8. Service Mode

Advertisement

Table of Contents
loading

Table of Contents