Canon imageRUNNER ADVANCE C5500 Series Service Manual page 877

COPIER > ADJUST > MISC
ACS-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-EN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-CNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-EN2 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-CNT2 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set criteria for B&W/color in ACS:front
To set the judgment level of B&W/color original in ACS mode.
As the value is increased, the original tends to be detected as a B&W document, and as the value
is decreased, the original tends to be detected as a color document.
When adjusting the color detection level in ACS mode
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-3 to 3
0
Set judgment area in ACS mode:front side
To set the judgment area in ACS mode.
As the greater value is set, the judgment area is widened.
When adjusting the judgment area in ACS mode
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
1
Set jdgmt pixel count area in ACS:front
To set the area which counts the pixel to judge the color presence in ACS mode.
As the greater value is set, the judgment area is widened.
When adjusting the area which counts the pixel to judge the color presence in ACS mode
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
0
Set ACS mode jdgmt area in DADF mode
To set the judgment area in ACS mode at DADF reading.
As the greater value is set, the judgment area is widened.
When adjusting the judgment area in ACS mode at DADF reading
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
1
Set ACS jdgmt pixel count area in DADF
To set the area which counts the pixel to judge the color presence in ACS mode at DADF reading.
As the greater value is set, the judgment area is widened.
When adjusting the area which counts the pixel to judge the color presence in ACS mode at DADF
reading
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
0
863
8. Service Mode