■ Procedure
1. Hold the handle [1] and remove the Main Controller PCB [2].
• 1 Screw [3]
• 1 Board-to-Board Connector [4]
[3]
2. Remove the 2 connectors [1], Wire Saddle [2], and Harness Guide [3] from the PCB.
3. Turn over the Main Controller PCB and remove the HDD Unit [1].
• 4 Screws [2]
[2]
[4]
1x
1x
[1]
2x
2x
4x
[1]
[1]
[1]
[3]
[2]
[2]
254
4. Disassembly/Assembly