Removing The Feed/Drum Driver Pcb - Canon imageRUNNER ADVANCE C5500 Series Service Manual

CAUTION:
When pulling out the Power Supply Unit, be careful not to pull it forcedly because the connector [1] is connected.
2. Remove the Fan Duct [1].
• 2 Screws [2]
3. Remove the Power Supply Unit [1].
• 2 Connectors [2]
• 1 Edge Saddle [3]

Removing the Feed/Drum Driver PCB

■ Preparation
1. Open the Right Lower Cover and the Right Upper Cover.
2. Removing the Right Rear Cover
[1]
2x
2x
1x
[3]
[2]
264
4. Disassembly/Assembly
[1]
[1]
[2]
[1]