Canon imageRUNNER ADVANCE C5500 Series Service Manual page 637

748-2023-00
Detection Description
Remedy
748-2024-00
Detection Description
Remedy
748-2025-00
Detection Description
Remedy
748-2026-00
Detection Description
Remedy
748-4910-00
Detection Description
Remedy
748-9000-00
Detection Description
Remedy
749-0006-00
Detection Description
Remedy
753-0001-00
Detection Description
Remedy
760-0001-00
Detection Description
Remedy
804-0000-00
Detection Description
Remedy
Main Controller PCB access error
Main controller board access errors
Replace the Main Controller PCB
Main Controller PCB access error
Main controller board access errors
Replace the Main Controller PCB
Main Controller PCB access error
Main controller board access errors
[Related parts] R1.00
- Bypass PCB
- Main Controller PCB
[Remedy] Check/replace the related connector and parts.
Main Controller PCB access error
Main controller board access errors
Check/replace the Main Controller PCB
Main Controller PCB access error
Main controller board access errors
Replace the Main Controller PCB
System error
System error
Contact to the sales company.
Error due to change in hardware configuration
Change in option configuration could not be detected.
[Remedy] Turn OFF and then ON the main power.
[Reference] Options are recognized again by turning OFF and then ON the main power.
In the case of changing option configuration, disconnect the power plug or turn OFF the breaker
after turning OFF the main power so that an error does not occur.
Download Error
Update of the system software failed.
Perform the following in the order while checking whether the error is cleared.
1. Turn OFF and then ON the main power.
2. Reinstall the system software using SST or a USB memory.
3. Replace the FLASH PCB, and reinstall the system software.
4. Collect debug log and contact the sales company.
Main Controller PCB internal error
An error was detected in the Main Controller PCB.
Check/replace the Main Controller PCB
Power Supply Cooling Fan error
It was detected that the Power Supply Cooling Fan was locked.
[Related parts] R1.00
- Harnesses from the Relay PCB (UN5/J412) and the Power Supply Cooling Fan (FM3/J6122)
- Power Supply Cooling Fan (FM3)
- Relay PCB (UN5)
[Remedy] Check/replace the related harness/cable, connector and parts.
623
7. Error/Jam/Alarm