Canon imageRUNNER ADVANCE C5500 Series Service Manual page 950

COPIER > OPTION > NETWORK
DDNSINTV 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
SIPAUDIO 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
SIPINOUT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
SIPREGPR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Set of DDNS periodical update interval
DNS registration is executed only once at start-up with the current iR, so the registered contents
are deleted in an environment where the DNS server settings are deleted at intervals.
To set the interval of DDNS periodical update for not deleting the registered contents.
When the DNS server settings are deleted at intervals
Enter the setting value, and then press OK key.
0 to 48
0: No periodical update, 1: 1-hour interval, 2: 2-hour interval, ..., 47: 47-hour interval, 48: 48-hour
interval
hour
24
Set of SIP session establishment order
To set whether to establish audio session or T.38 session first with SIP.
Usually, audio session followed by T.38 session is established when using IPFAX in an intranet
environment. However, this order is not specified by the standard.
Set 1 when connecting the SIP server or terminal where the session starts with T.38 session.
When connecting the SIP server or terminal where the session starts with T.38 session
Enter the setting value, and then press OK key.
When 1 is set, IPFAX fails with the destination where the session starts with audio session.
0 to 1
0: audio, 1: T.38
0
SIP: Session Initiation Protocol
Set of internal/external number to URI
To set whether to store the external number or the internal number in From URI when using NGN.
When a call cannot be made with external number while using NGN
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: External number, 1: Internal number
0
NGN: Next Generation Network
URI: Uniform Resource Identifier
Setting of registrar server use protocol
To set the protocol used for communication with registrar server.
Although the protocol that is the same as the one for proxy server is usually used, another protocol
can be used in accordance with user and environment.
Upon user's request (to use a protocol different from the one for proxy server)
Enter the setting value, and then press OK key.
0 to 3
0: Protocol set in Settings/Registration menu, 1: UDP, 2: TCP, 3: SSL
0
Preferences> Network> TCP/IP Settings> SIP Settings> Intranet Settings
936
8. Service Mode