Canon imageRUNNER ADVANCE C5500 Series Service Manual page 311

5. Remove the pin [1] on the rear side.
• 1 Screw [2]
1x
NOTE:
Put the ITB Cover with its upside down at the location where you are going to stand the ITB Unit.
6. Lift up the ITB Unit [1], and stand it on the ITB Cover [2].
CAUTION:
• Be sure to check that it has been freed from the hooks [3] on the front and rear side.
• Be sure to align the claws [4] of the ITB Cover with the cut in the Protection Sheet.
• In order to prevent the ITB from being damaged, be sure to place a sheet of paper [5] between the ITB Unit and the
ITB Cover as needed.
• 2 Claws
2x
[1]
[3]
[1]
[2]
[5]
297
[2]
[5]
[4]
4. Disassembly/Assembly
[4]