Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1227

8
4x
NOTE:
The removed screw will be used in step 11.
CAUTION:
Be sure to place the removed Main Controller PCB 1
flatly. Reason: Due to the protruded plate, the PCB may
be deformed if work is performed while it is placed at
an angle.
9
2x
NOTE:
The removed screws will be used at next step.
10
CAUTION:
Check that the connector is connected properly.
NOTE:
Use the screw removed at previous step.
3x
1x
1213
9. Installation
TP M3x6