Canon imageRUNNER ADVANCE C5500 Series Service Manual page 924

COPIER > OPTION > FNC-SW
PDL-Z-LG 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
CDS-LVUP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
Setting of drawing algorithm
To switch the drawing algorithm of the iR C series and the iR-ADV C series to obtain output
expected by the user.
When 0 is set, image is output as displayed on the screen by the new algorithm adopted from the
iR-ADV C Series. Pseudo outline (boundary for processing divided graphics separately) occurred
with the iR C series does not occur. However, when PDL job with special data structure is sent,
output expected by the user may not be obtained.
When 1 is set, the drawing algorithm adopted by the conventional iR C series is used. Output
equivalent to that of the iR C Series can be obtained; however, drawing-related phenomenon
occurred with the series occurs.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not use setting value 2 and 3.
0 to 3
0: Drawing algorithm of iR-ADV C series, 1: Drawing algorithm of the conventional iR C series, 2,
3: For R&D use
0
Set to allow CDS periodical update
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow the user (administrator) to perform periodical update linked with CDS.
When 1 is set, setting of periodical update can be made in Settings/Registration menu/via remote
UI.
When 2 is set, setting of periodical update can be made on the Updater screen in service mode.
When allowing the user/service technician to perform periodical update
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Prohibited periodical update
1: Display the periodical update setting screen in Settings/Registration menu/on remote UI
2: Display the periodical update setting screen on the Updater in service mode
It differs according to the location.
Updater
Management Settings> License/Other> Register/Update Software> Periodical Update
CDS: Contents Delivery System
910
8. Service Mode