Canon imageRUNNER ADVANCE C5500 Series Service Manual page 638

805-0000-05
Detection Description
Remedy
805-0001-05
Detection Description
Remedy
806-0000-05
Detection Description
Remedy
806-0001-05
Detection Description
Remedy
806-0002-05
Detection Description
Remedy
Fixing Heat Exhaust Fan Error
Rotation error of the Fixing Heat Exhaust Fan 1 was detected.
- Rotation signal was detected while the fan was being stopped, or the signal was not detected
during operation.
[Related parts] R1.01
- Harness between the Feed/Drum Driver PCB (UN2/J217) and the Fixing Heat Exhaust Fan 1
(FM1/J6066)
- Fixing Heat Exhaust Fan 1 (FM1)
- Feed/Drum Driver PCB (UN2)
[Remedy] Check/replace the related harness/cable, connector and parts.
Fixing Heat Exhaust Fan Error
Rotation error of the Fixing Heat Exhaust Fan 2 was detected.
- Rotation signal was detected while the fan was being stopped, or the signal was not detected
during operation.
[Related parts] R1.01
- Harness between the Feed/Drum Driver PCB (UN2/J217) and the Fixing Heat Exhaust Fan 2
(FM2/J6067)
- Fixing Heat Exhaust Fan 2 (FM2)
- Feed/Drum Driver PCB (UN2)
[Remedy] Check/replace the related harness/cable, connector and parts.
Delivery fan Error
Rotation error of the Delivery Fan 1 was detected.
- Rotation signal was detected while the fan was being stopped, or the signal was not detected
during operation.
[Related parts] R1.00
- Harness between the Feed/Drum Driver PCB (UN2/J213) and the Delivery Fan 1 (FM7/J6061)
- Delivery Fan 1 (FM7)
- Feed/Drum Driver PCB (UN2)
[Remedy] Check/replace the related harness/cable, connector and parts.
Delivery fan Error
Rotation error of the Delivery Fan 2 was detected.
- Rotation signal was detected while the fan was being stopped, or the signal was not detected
during operation.
[Related parts] R1.00
- Harness between the Front Driver PCB (UN3/J301) and the Delivery Fan 2 (FM9/J3012)
- Delivery Fan 2 (FM9)
- Front Driver PCB (UN3)
[Remedy] Check/replace the related harness/cable, connector and parts.
Secondary Transfer Exhaust Fan Error
Rotation error of the Secondary Transfer Exhaust Fan was detected.
- Rotation signal was detected while the fan was being stopped, or the signal was not detected
during operation.
[Related parts] R1.00
- Harness between the Feed/Drum Driver PCB (UN2/J213) and the Secondary Transfer Exhaust
Fan (FM8/J6071)
- Secondary Transfer Exhaust Fan (FM8)
- Feed/Drum Driver PCB (UN2)
[Remedy] Check/replace the related harness/cable, connector and parts.
624
7. Error/Jam/Alarm