Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1194

2
3
Connect the power plug of the host machine to the outlet.
4
Turn ON the main power switch.
Settings after installation
1. Set the value of the following service mode (Level 1)
to "1".
• COPIER > OPTION > ACC > OUT-TRAY
2. Turn OFF and then ON the main power.
3. Check that the following menu has been added.
• [Settings/Registration] > [Function Settings] >
[Common] > [Paper Output Settings] > [Tray
Designation]
4. Press [Tray Designation].
5. According to the user's request, set the function of
delivering paper to the Tray A/B/C and the priority
order of the trays, and press [OK]. The priority order
is displayed as "1", "2", and "3".
6. Check that the behavior is in accordance with the
settings.
1180
9. Installation