Canon imageRUNNER ADVANCE C5500 Series Service Manual page 451

2. Perform back p in the following service mode (Lv.2).
• Service Mode > COPIER > FUNCTION > SYSTEM > RSRAMBUP
■ Actions after Parts Replacement
1. Upgrade the firmware to make the combination of firmware appropriate so that the machine operates normally.
* The use of automatic update function is recommended.
2. Depending on the status of backup, perform one of the following measures.
• When backup is performed normally
Execute the following service modes to restore the backup data.
• Service Mode > (Lv.2) COPIER > FUNCTION > SYSTEM > RSRAMRES
NOTE:
Work is completed when backup was normally performed.
• When backup is not performed normally
Enter the values written on the service label (on the back of the Reader Front Cover) in the following service modes.
Service Mode > COPIER > ADJUST > ADJ-XY >
Service Mode > COPIER > ADJUST > CCD >
Service Mode > COPIER > ADJUST > PASCAL >
Service Mode > FEEDER > ADJUST >
Path for Service Modes
COPIER > ADJUST > ADJ-XY > ADJ-X, ADJ-Y, STRD-POS, ADJ-X-MG, ADJ-Y-DF, ADJY-DF2, ADJ-S
COPIER > ADJUST > CCD >
COPIER > ADJUST > PASCAL
>
FEEDER > ADJUST >
3. In following service mode, calculate the MTF filter coefficient.
• Service Mode > COPIER > FUNCTION > CCD > MTF-CLC
4. In following service mode, calculate for matching paper front and back linearity.
• Service Mode > COPIER > FUNCTION > CCD > DF-LNR
5. In following service mode, execute either AB or Inch configuration tray width adjustment.
• To execute AB configuration adjustment
1. Align the Slide Guide with "A4/A3".
2. Select the service mode, press the OK key, and register the width of A4.
• Service Mode > FEEDER > FUNCTION > TRY-A4
3. Align the Slide Guide with "A5R".
4. Select the service mode, press the OK key, and register the width of A5R.
• Service Mode > FEEDER > FUNCTION > TRY- A5R
• To execute Inch configuration adjustment
1. Align the Slide Guide with "LTR/11x17".
2. Select the service mode, press the OK key, and register the width of LTR.
• Service Mode > FEEDER > FUNCTION > TRY-LTR
3. Align the Slide Guide with "STMT/LTRR/LGL".
4. Select the service mode, press the OK key, and register the width of LTRR.
• Service Mode > FEEDER > FUNCTION > TRY- LTRR
List of Service Mode Items to Enter Values
Service Mode Items to Enter Values
SH-TRGT, DFTBK-R, DFCH-R2, DFCH2R2, W-PLT-X, DFTBK-G, DFCH-R10,
DFCH2R10, W-PLT-Y, DFTBK-B, DFCH-G2, DFCH2G2, W-PLT-Z, DFTBK-BW, DFCH-
G10, DFCH2G10, DFTAR-R, 100-RG, DFCH-B2, DFCH2B2, DFTAR-G, 100-GB, DFCH-
B10, DFCH2B10, DFTAR-B, 100DF2RG, DFCH-K2, DFCH2K2, DFTAR-BW, 100DF2GB,
DFCH-K10, DFCH2K10, MTF-M1, MTF-S1, MTF2-M1, MTF2-S1, MTF-M2, MTF-S2,
MTF2-M2, MTF2-S2, MTF-M3, MTF-S3, MTF2-M3, MTF2-S3, MTF-M4, MTF-S4, MTF2-
M4, MTF2-S4, MTF-M5, MTF-S5, MTF2-M5, MTF2-S5, MTF-M6, MTF-S6, MTF2-M6,
MTF2-S6, MTF-M7, MTF-S7, MTF2-M7, MTF2-S7, MTF-M8, MTF-S8, MTF2-M8, MTF2-
S8, MTF-M9, MTF-S9, MTF2-M9, MTF2-S9, MTF-M10, MTF-S10, MTF2-M10, MTF2-S10,
MTF-M11, MTF-S11, MTF2-M11, MTF2-S11, MTF-M12, MTF-S12, MTF2-M12, MTF2-S12
OFST-P-Y, OFST-P-M, OFST-P-C, OFST-P-K
LA-SPEED, LA-SPD2, DOCST, DOCST2
437
5. Adjustment