Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1015

COPIER > OPTION > USER
VC-CNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VC-AVE 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VC-HIGH 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VC-LOW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set tiered base pricing oprtn method
To set the operation method of the tiered base pricing.
Name of the tiered base pricing counter displayed on the Check Counter screen is switched
according to the selected operation method.
When starting operation of the tiered base pricing
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Normal charge, 1: Tiered base pricing 1, 2: Tiered base pricing 2, 3: Tiered base pricing 3
0
Set tiered base pricing calculate method
To set the calculation method of video count correction value to be used for the tiered base pricing.
When 0 is set, the correction value is derived by averaging the video count values for 3 colors (Y/
M/C). When 1 is set, it is derived by averaging the video count values for 4 colors (Y/M/C/Bk).
According to the usage of the user
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: (Y+M+C)/3, 1: (Y+M+C+Bk)/4
0
Tiered base pricing cntr "High" thrshld
To set the threshold value for the tiered base pricing counter "High".
To enter the value 10 times higher than the estimated video count value (%).
Video count correction value higher than the value (setting value x 0.1 (%)) is judged as "High".
As the value is changed by 1, the threshold is changed by 0.1%.
According to the usage of the user
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
50 to 2000 (5 to 200%)
100
Tiered base pricing cntr "Low" thrshld
To set the threshold value for the tiered base pricing counter "Low".
To enter the value 10 times higher than the estimated video count value (%).
Video count correction value lower than the value (setting value x 0.1 (%)) is judged as "Low".
As the value is changed by 1, the threshold is changed by 0.1%.
According to the usage of the user
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 50 (0 to 5%)
10
1001
8. Service Mode