Removing The Transparency Sensor/Registration Sensor - Canon imageRUNNER ADVANCE C5500 Series Service Manual

NOTE:
For the following procedure, the Cassette 1 Pickup Unit is used as an example in the description. Perform the same
procedure for the Cassette 2 Pickup Unit.
2. Remove the Cassette 1 Pickup Unit [1].
• 2 Connectors [2] (1 in the case of the Cassette 2)
• 4 Screws [3] (RS Tightening; M4)
[3]
CAUTION:
• When installing the Pickup Unit provided as a service part, if it has the Fixation Member [1] attached as shown in the
figure below, remove it before work.
• In case the Pickup Unit provided as a service part is not used, keep the unit with the Fixation Member [1] installed to
the original position.

Removing the Transparency Sensor/Registration Sensor

■ Preparation
1. Pull out the Cassettes 1 and 2.
4x
[1]
[3]
[1]
403
4. Disassembly/Assembly
2x
[2]