Canon imageRUNNER ADVANCE C5500 Series Service Manual page 780

COPIER > DISPLAY > DRSTS-M
DR-O-D-M 1
Detail
Use Case
Adj/Set/Operate Method
Caution
D-ST-M 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
INI-S-M 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
REP-S-M 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
■ DRSTS-K
COPIER > DISPLAY > DRSTS-K
DR-I-D-K 1
Detail
Use Case
Adj/Set/Operate Method
Caution
DRM-ID-K 1
Detail
Use Case
Adj/Set/Operate Method
Dspl of Drum Unit (M) removed date
To display the removed date of the Drum Unit (M).
The date on which the machine recognized that the ID of the replaced Drum Unit is different is
displayed.
- When outputting the drum report
- When checking the ID of the Drum Unit
N/A (Display only)
The date may differ from that at the location due to compliance with GMT.
Display of Drum Unit (M) status
To display the status of the Drum Unit (M).
- When outputting the drum report
- When checking the state of the Drum Unit
N/A (Display only)
0 to 3
Dspl of Drum Unit installed station: M
To display the color of the station where the Drum Unit was installed first.
- When outputting the drum report
- When checking the station information
N/A (Display only)
0 to 4
1: Y, 2: M, 3: C, 4: Bk, 0: Others
Dspl Drum Unit replacement station: M
To display the color of the station where the Drum Unit has been replaced.
- When outputting the drum report
- When checking the station information
N/A (Display only)
0 to 4
1: Y, 2: M, 3: C, 4: Bk, 0: Others
Dspl of Drum Unit (Bk) installed date
To display the installed date of the Drum Unit (Bk).
At initial installation, the date of the first power supply after assembling at factory is displayed.
When the Drum Unit is replaced, the date of the first power supply after replacement is displayed.
When checking the installed date of the Drum Unit
N/A (Display only)
The date may differ from that at the location due to compliance with GMT.
Display of Drum Unit (Bk) ID
To display the ID of the Drum Unit (Bk) that is installed to the machine.
- When outputting the drum report
- When checking the ID of the Drum Unit
N/A (Display only)
766
8. Service Mode