Related Manuals for Canon imageRUNNER ADVANCE DX
Summary of Contents for Canon imageRUNNER ADVANCE DX
- Page 1 ADVANCE DX User's Guide (Notification of New and Enhanced Functions) USRMA-6766-01 2021-10 en Copyright CANON INC. 2021...
-
Page 2: Table Of Contents
Contents Read This First ..............................2 Changes to Functions ..........................6 ....................7 Changes to the Secondary Transfer Voltage (Ver. 3.12-) ....................11 Changes to the Eco (Staple-Free) mode (Ver. 3.12-) ........................13 Changes Related to Clearing Paper Jams ..........................17 Changes to System Specifications Changes to Settings/Registration .................... -
Page 3: Read This First
Read This First Read This First Read This First ..............................2... - Page 4 Read This First Read This First 80L4-000 This manual should be read in conjunction with the User's Guide. This manual describes added functions and other changes for Platform Version Ver. 3.12 or later. ◼ Checking The Version Depending on the model, you may not be able to apply the latest Platform Version. Use the procedure below to check the version before reading this manual.
- Page 5 All black and white models imageRUNNER ADVANCE DX C5870i / C5860i / C5850i / C5840i imageRUNNER ADVANCE DX C3835i / C3835 / C3830i / C3830 / C3826i / C3826 / C3822i / C3822 imageRUNNER ADVANCE DX C478iZ / C478i ●...
- Page 6 Read This First All other trademarks are the property of their respective owners. Other product and company names herein may be the trademarks of their respective owners.
-
Page 7: Changes To Functions
Changes to Functions Changes to Functions Changes to Functions ............................6 ..................7 Changes to the Secondary Transfer Voltage (Ver. 3.12-) ................... 11 Changes to the Eco (Staple-Free) mode (Ver. 3.12-) ......................13 Changes Related to Clearing Paper Jams ........................17 Changes to System Specifications... -
Page 8: Changes To Functions
Changes to Functions Changes to Functions 80L4-002 This section describes the changes that apply to the functions of this machine. Changes to the Secondary Transfer Voltage (Ver. 3.12-)(P. 7) Changes to the Eco (Staple-Free) mode (Ver. 3.12-)(P. 11) Changes Related to Clearing Paper Jams(P. 13) Changes to System Specifications(P. -
Page 9: Changes To The Secondary Transfer Voltage (Ver. 3.12-)
Changes to Functions Changes to the Secondary Transfer Voltage 80L4-003 Images printed on registered custom paper may be faint or uneven compared to images printed on plain paper. If this occurs, you can now scan the printed chart and change the secondary transfer voltage (the voltage that transfers toner to the paper). - Page 10 Changes to Functions Specify the settings for the chart to be printed and press <Next>. <Chart Print Type> Select <For Fine Adjustment> to make fine adjustments or <For Coarse Adjustment> if major adjustment is required. ● If you selected <For Fine Adjustment>, a chart is printed with adjustments in increments of ±1. ●...
- Page 11 Changes to Functions Check the optimal patch in the printed chart. ● With the current settings, chart numbers are printed in magenta. ● Check the chart as you sequentially increase from negative values to positive values. When you reach a point where the density within the patch appears uniform (-8 in the example), compare it with a patch with a value that is higher by 2 (-7 and -6 in the example) and select the value you consider to be optimal.
- Page 12 Changes to Functions ◼ If you selected <Use Scanner> Scan the chart on the scanner to have the optimal patch identified automatically. Place the chart on the platen glass. ● Place the chart while following the on-screen instructions. Close the feeder and press <Start Scanning>. ➠...
-
Page 13: Changes To The Eco (Staple-Free) Mode (Ver. 3.12-)
Changes to Functions Changes to the Eco (Staple-Free) mode 80L4-004 ◼ Changing the Number of Sheets in Eco (Staple-Free) Mode The number of sheets in the Eco (Staple-Free) mode has changed as shown below. Inner Finisher-L Staple Max. Stapling Capacity Staple (Eco) ●... - Page 14 Changes to Functions Staple Finisher-AE / Booklet Finisher-AE Staple Max. Stapling Capacity Staple (Eco): 10 sheets (52 g/m² to 64 g/m²) 8 sheets (65 g/m² to 81.4 g/m²) 6 sheets (82 g/m² to 105 g/m²) * When the standard staple cartridge is attached. (The maximum stapling capacity may vary, depending on the paper type and weight.)
-
Page 15: Changes Related To Clearing Paper Jams
Changes to Functions Changes Related to Clearing Paper Jams 80L4-00J If a paper jam occurs inside the main unit when the inner finisher is installed, there is an additional process for clearing the paper jam. This describes the process, using images of the C5800 series as examples. Open the right cover of the main unit. - Page 16 Changes to Functions Hold the lever ( ), and slide the inner finisher to the left. Check whether paper is jammed in the inner finisher. Lift up the guide at the entrance. If paper is jammed, gently pull it out in the direction of the arrow. Return the guide to its original position.
- Page 17 Changes to Functions Turn the green knob to feed the jammed paper to the outlet of the puncher unit. If paper comes out of the outlet of the puncher unit, gently pull the paper out in the direction of the arrow.
- Page 18 Changes to Functions Close the left cover of the finisher. Gently close the right cover of the main unit until they click. ● Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
-
Page 19: Changes To System Specifications
Changes to Functions Changes to System Specifications 80L4-005 Changes to Send Functions(P. 17) Changes to Printer Functions(P. 17) ◼ Changes to Send Functions The interfaces have changed as shown below. Push Scan Interface 1000 Base-T/100 Base-TX/10 Base-T (IEEE 802.3 compliant), Wi-Fi (IEEE 802.11b/g/n) Pull Scan USB2.0High-Speed, 1000Base-T/100Base-TX/10Base-T (IEEE 802.3 compliant), Wi-Fi (IEEE Interface... -
Page 20: Changes To Settings/Registration
Changes to Settings/Registration Changes to Settings/Registration Changes to Settings/Registration ......................19 ................................20 New Items ........21 <Adj. Lead Edge Sec. Transfer Volt.>/< Correct Tail End Toner Application> (Ver. 3.12-) ............... 24 <Allow Jobs to Be Performed from Mobile Device> (Ver. 3.12-) -
Page 21: New Items
Changes to Settings/Registration Changes to Settings/Registration 80L4-006 This description explains changes to items in the <Settings/Registration> screen. The <Settings/Registration> screen appears when you press (Settings/Registration) on the operation panel. New Items(P. 20) -
Page 22: Adj. Lead Edge Sec. Transfer Volt.>/< Correct Tail End Toner Application> (Ver. 3.12-)
Changes to Settings/Registration New Items 80L4-007 This section describes new items added to Settings/Registration. <Adj. Lead Edge Sec. Transfer Volt.>/< Correct Tail End Toner Application> (Ver. 3.12-)(P. 21) <Allow Jobs to Be Performed from Mobile Device> (Ver. 3.12-)(P. 24) - Page 23 Changes to Settings/Registration <Adj. Lead Edge Sec. Transfer Volt.>/< Correct Tail End Toner Application> 80L4-008 (Settings/Registration) <Preferences> <Paper Settings> <Paper Type Management Settings> ◼ Adj. Lead Edge Sec. Transfer Volt. If the image on the leading edge is faint or uneven compared to images printed on plain paper, you can now change the leading-edge secondary transfer voltage (the voltage that transfers toner to the paper) for the registered custom paper.
- Page 24 Changes to Settings/Registration ● Follow the guidelines below to perform adjustment. - <Adjustment Level>: Increasing this in the positive direction increases the effect for tail end image problems. Increasing the value too high may cause toner to be missing in high density areas. - <Correction Amount>: Increasing this in the positive direction increases the distance where control is performed from the tail end of the paper in the lead edge direction when seen from the tail end of the paper.
- Page 25 Changes to Settings/Registration Item Setting DeviceAdmin NetworkAdmin Can be Device Import Name of Description set in Information Item When Remote Delivery Function Exporting Available with the Remote UI <Duplicate>, <Delete> * <Use as Template Paper>, <2nd Side of 2-Sided Page>, <Adjust Image Position>, <Adjust Gloss>, <Adj. Secondary Transfer Voltage>, and <Toner Amount Reduction Mode>...
-
Page 26: Allow Jobs To Be Performed From Mobile Device> (Ver. 3.12-)
Changes to Settings/Registration <Allow Jobs to Be Performed from Mobile Device> 80L4-00K (Settings/Registration) <Management Settings> <License/Other> You can now specify settings to scan and then email/fax documents using a mobile device. When <Authenticate with PIN Code for Scan Jobs> is set to <On>, you must enter the PIN shown on this machine during job execution. ●... -
Page 27: Other Changes To The User's Guide
Other Changes to the User's Guide Other Changes to the User's Guide Other Changes to the User's Guide ....................... 26... - Page 28 Other Changes to the User's Guide Other Changes to the User's Guide 80L4-009 Linking with Mobile Devices Utilizing the Machine through Applications The description of Chrome OS has been added. ◼ Printing from Chrome OS You can perform printing from Chrome OS without downloading a dedicated application or installing a driver. ®...
- Page 29 Other Changes to the User's Guide Appendix MEAP Managing MEAP Applications The description in " [MEAP Application Management]" of step 3 has been changed (description of the bottom row of the table under the second bullet point changed). [Installed] The MEAP application has been installed, but it is not ready for use. Even if you restart the machine after stopping the use of the MEAP application, [Installed] is displayed.
- Page 30 Other Changes to the User's Guide Memory Capacity RAM: 5 GB (Main CPU Side: 2 GB, Image Processing CPU Side: 2 GB + 1 GB (reserved for image processing)) Storage Disk: ● Standard: 256 GB ● Maximum: 1 TB Introduction (About the Machine) Main Unit Maintenance Replacing the Drum Unit An "IMPORTANT"...
- Page 31 Other Changes to the User's Guide When <Sleep Mode Energy Use> is set to <Low> ● Depending on the utility software, communication may fail if the machine is in sleep mode. Return the machine from sleep status. Setting Up Setting up the Network Environment Selecting the Network Connection Method The description in "IMPORTANT"...
- Page 32 Other Changes to the User's Guide Setting Up Setting up the Network Environment Adapting to the Network Environment Making SMB Settings The description of " <Require Encryption for Connection>" in step 3 of “Setting the SMB Client” has been changed. <Require Encryption for Connection>...
- Page 33 Other Changes to the User's Guide <Monitor Volume> Adjust the volume of the following tones. To mute the sound, press several times to set the volume to the far left. ● The tone that sounds when sending faxes ● The tone that sounds when printing of a received fax is complete, and the tone that sounds when a fax ends due to an error Basic Operations Entering Sleep Mode...
- Page 34 Other Changes to the User's Guide ● After automatic exporting and deleting of the audit logs have succeeded, each log is generated. If other log collections do not occur by the next automatic export time, the audit log will not be automatically exported.
- Page 35 Other Changes to the User's Guide ● When either <Wireless LAN> or <Wired LAN + Wireless LAN> is selected, <Sleep Mode Energy Use> will be set to <High>. Settings/Registration <Preferences> <Network> <Bluetooth Settings> The description in "NOTE" of "<Use Bluetooth>" has been changed. ●...
- Page 36 Other Changes to the User's Guide Item Setting DeviceAdmin NetworkAdmin Can be Device Import Name of Item Description set in Information When Remote Delivery Function Exporting Available with the Remote UI Basic Information <2.0>: <On>, Settings/ <Off> Registration Basic Information <3.0>: <On>, Settings/ <Off>...
-
Page 37: Changes To Related Manuals
Changes to Related Manuals Changes to Related Manuals Changes to Related Manuals ........................36 ............37 Changes to Setup for Linking with Mobile Devices Administrator Guide... - Page 38 Changes to Related Manuals Changes to Related Manuals 80L4-00L This section describes changes that apply to the related manuals for this machine. Changes to Setup for Linking with Mobile Devices Administrator Guide(P. 37)
-
Page 39: Changes To Setup For Linking With Mobile Devices Administrator Guide
80L4-00R Mobile Functions With Canon PRINT Business version 8.0 and later, you can scan and then email/fax jobs using a mobile device. Originals are scanned and sent from a machine using the settings saved on the mobile device. Mobile Functions... -
Page 40: Changes For Each Version
Changes for Each Version Changes for Each Version Changes for Each Version ..........................39 ............................40 Changes in Ver. 3.12... - Page 41 Changes for Each Version Changes for Each Version 80L4-00A This section lists all the changes in each version. Changes in Ver. 3.12(P. 40)
- Page 42 Changes for Each Version Changes in Ver. 3.12 80L4-00C The changes in Platform Version Ver. 3.12 are listed below. The functions and settings listed here may not be available on some models. For details, see the descriptions in the links in each change. Changes to Functions(P.
-
Page 43: Third Party Software
Third Party Software Third Party Software Third Party Software ............................42... - Page 44 Third Party Software Third Party Software 80L4-00F See the HTML manual for information on third-party software for each version. You can view the HTML manual from the online manual site (https://oip.manual.canon/).
- Page 45 SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------- SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007 ----------------------------------------------------------- PREAMBLE The goals of the Open Font License (OFL) are to stimulate worldwide...
- Page 46 SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.