Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1165

NFC Kit-B1 (Flat Control
Panel)
Points to Note before
Installation
CAUTION:
Do not touch the sensor and PCB components of the
Control Panel.
NOTE:
The removed parts other than unnecessary parts will be
used in "Installing the NFC Kit".
Checking the Contents
Check Item When Turning OFF
the Main Power
Check that the main power is OFF.
1. Turn OFF the main power switch.
2. Check that the display in the Control Panel and the
lamp of the main power are turned off, and then
disconnect the power plug.
1x
Installation Outline Drawing
Installation procedure
■ Remove the Control Panel
1
2
2x
1151
9. Installation