Canon imageRUNNER ADVANCE C5500 Series Service Manual page 817

COPIER > ADJUST > CCD
DFCH-R10 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
DFCH-B2 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
DFCH-B10 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
DFCH-G2 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
Complex chart No.10 data (R) entry: back
To derive the front/back side linearity, enter the Red data on the back side of No.10 image in DADF
complex chart.
Enter the value of service label on the Reader.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2550
0
1
Complex chart No.2 data (B) entry: back
To derive the front/back side linearity, enter the Blue data on the back side of No.2 image in DADF
complex chart.
Enter the value of service label on the Reader.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 2550
2000
1
Complex chart No.10 data (B) entry: back
To derive the front/back side linearity, enter the Blue data on the back side of No.10 image in DADF
complex chart.
Enter the value of service label on the Reader.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2550
0
1
Complex chart No.2 data (G) entry: back
To derive the front/back side linearity, enter the Green data on the back side of No.2 image in
DADF complex chart.
Enter the value of service label on the Reader.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 2550
2000
1
803
8. Service Mode