Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1006

COPIER > OPTION > USER
LDAP-DEF 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
JA-DPI 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
JA-COMPR 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
FREE-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Initial condtn set of LDAP server search
To set initial condition for search target attribute that is specified at the time of LDAP server Details
search.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5: No registration 1 (any setting),
6: No registration 2 (any setting)
0
COPIER> OPTION> USER> LDAP-SW
Display of job archive record resolution
To display the resolution of images for job archives recorded in jobs other than FAX reception and
I-Fax reception, etc.
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Upon user's request
N/A (Display only)
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
0 to 3
0: No conversion, 1: 100 x 100 dpi, 2: 200 x 200 dpi, 3: 300 x 300 dpi
3
Dspl job archive record compress ratio
To display the compression ratio of images for job archives recorded in jobs other than FAX
reception and I-Fax reception, etc.
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Upon user's request
N/A (Display only)
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
0 to 5
0: No conversion, 1: Compression ratio 1/4, 2: Compression ratio 1/8, 3: Compression ratio 1/16,
4: Compression ratio 1/32, 5: Compression ratio 1/64
3
Display/hide of charge disable screen
To set whether to display or hide the Use Charge Management screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily releasing the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the Use Charge Management screen in Settings/Registration.
When enabling all the services to be provided for free by temporarily releasing the charging system
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Management Settings> Charge Management> Use Charge Management
992
8. Service Mode