Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1016

COPIER > OPTION > USER
FLM-DSPL 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
DRS-ADR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Supplement/Memo
DRS-USER 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Supplement/Memo
DRS-PSWD 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Supplement/Memo
JA-WIFI 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF of Clear Film usage
To set whether to use the Clear Film.
When 0 is set, the Clear Film cannot be used.
When 1 is set, "Clear Film" is displayed on the paper type screen for the Multi-purpose Tray and
POD Deck Lite so it can be registered as the paper to be used.
When using large size transparency or special film (for customization)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
After the setting is made, be sure to check that it can be fed. If there is an error, set the value back
to 0.
0 to 1
0: OFF, 1: ON
0
Preferences> Paper Settings> Paper Settings> Paper Type
Setting of URL of DRS relay server
To set URL of the relay server used for DRS.
When using DRS
Enter URL, and then press OK key.
Up to 512 characters
DRS: Abbreviation of Direct Remote Service. Providing remote support using service support tool
by directly connecting PC at call center and the device.
Setting of user name of DRS relay server
To set user name of the relay server used for DRS.
When using DRS
Enter user name, and then press OK key.
Up to 256 characters
DRS: Abbreviation of Direct Remote Service. Providing remote support using service support tool
by directly connecting PC at call center and the device.
Setting of password of DRS relay server
To set password of the relay server used for DRS.
When using DRS
Enter password, and then press OK key.
Password is hidden with asterisks (*).
Up to 256 characters
DRS: Abbreviation of Direct Remote Service. Providing remote support using service support tool
by directly connecting PC at call center and the device.
Setting of SAM Wi-Fi direct print
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow Wi-Fi direct print when iW SAM is enabled.
Wi-Fi direct print cannot be used when iW SAM is enabled. However, when 1 is set, it can be used.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
1002
8. Service Mode