Canon imageRUNNER ADVANCE C5500 Series Service Manual page 887

COPIER > FUNCTION > INSTALL
INISET-K 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Required Time
Related Service Mode
BRWS-ACT 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
CDS-CTL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
Exe of Dev Unit (Bk) initial install mod
To automatically execute operation necessary for initial installation of the Developing Unit (Bk).
1. Idle rotation of the Developing Unit
2. Initialization of the ATR Sensor
3. Secondary transfer ATVC control
4. Patch light intensity correction
5. Background correction
6. Discharge current control
7. Primary transfer ATVC control
8. Initialization of the Patch Sensor
9. Color displacement correction control
10. D-max control
11. D-half control
12. ARCDAT-Lite (creation of target)
13. Cleaning of the Secondary Transfer Outer Roller (twice)
14. Reset of the Developing Unit counter
When replacing the Developing Unit (Bk)
Select the item, and then press OK key.
When installing the machine or replacing the Developing Unit of other color, do not use this item.
During operation: xxx second (remaining time), At normal termination: OK, At abnormal
termination: NG
155 sec
COPIER> FUNCTION> INSTALL> INISET-Y/M/C/4
ON/OFF of service browser
To set ON/OFF of service browser.
ON/OFF of service browser switches whenever the main power switch is turned OFF/ON after
execution.
If connection with the UGW server is successful, "OK!" is displayed. If "NG!" is displayed, execute
a communication test using COM-TEST.
The setting is enabled after reboot. Whether the service browser is ON or OFF can be checked in
COPIER> DISPLAY> USER> BRWS-STS (1: ON, 2: OFF).
- When using the service browser
- At operation check
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
After execution, turn OFF/ON the main power switch. After reboot, be sure to check the usage
status in COPIER> DISPLAY> USER> BRWS-STS.
At normal termination: OK!, At abnormal termination: NG!
COPIER> FUNCTION> INSTALL> COM-TEST
COPIER> DISPLAY> USER> BRWS-STS
Set country/area when using CDS
To set country/area to enable CDS.
When enabling CDS
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Country/area set in COPIER> OPTION> FNC-SW> CONFIG, CA (Canada), LA (Latin America)
and HK (Hong Kong)
It differs according to the location.
COPIER> OPTION> FNC-SW> CONFIG
CDS: Contents Delivery System
873
8. Service Mode