Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1022

COPIER > OPTION > ACC
UNIT-PRC 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IN-TRAY 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
MIN-PRC 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
MAX-PRC 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
Setting of Coin Manager currency unit
To set currency unit to be handled with Coin Manager
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 6
0: Japanese yen, 1: Euro, 2: Pound, 3: Swiss Franc, 4: Dollar, 5: No currency unit (no fractional
unit), 6: No currency unit (with fractional unit)
0
Presence/absence of Second Delivery Tray
To set whether the Second Delivery Tray is installed or not.
When it is installed, set 1.
When the Second Delivery Tray is installed
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Not installed, 1: Installed
0
Set of Coin Manager minimum price
To set the minimum amount to be handled with Coin Manager.
Enter 10 when specifying 10 Japanese yen as the minimum amount to be handled with the Coin
Manager that supports Japanese yen.
In the case to specify 1 to 4 (Euro/Pound/Swiss Franc/Dollar) by going through the following:
COPIER> OPTION> ACC> UNIT-PRC, entry is in fractional unit. Entry of 50 indicates 50 cents ($
0.50).
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
0 to 9999
10
COPIER> OPTION> ACC> COIN, UNIT-PRC
When a value smaller than the minimum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
Set of Coin Manager maximum price
To set the maximum amount to be handled with Coin Manager.
Enter 8800 when specifying 8800 Japanese yen as the maximum amount to be handled with the
Coin Manager that supports Japanese yen.
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
0 to 9999
8800
COPIER> OPTION> ACC> COIN, UNIT-PRC
When a value larger than the maximum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
1008
8. Service Mode