Auerswald COMpact 5200 Advanced Information page 73

Configuration Options
You can configure internal ISDN system phones via an indirect connection
using the PBX. Before you can do this, you must install the ISDN system
phone's COMfortel Set configuration software on the PC you are going to
use.
Remote configuration of internal ISDN system phones via an external
S port of the PBX
0
You can remotely configure the ISDN system phone indirectly via an
external ISDN connection using the PBX and a device which is connected
to both the external S0 port on the PBX and to the PC (for example ISDN
PC controller). The PBX must be configured accordingly. Before you can
do this, you must install the ISDN system phone's configuration software
on the PC you are going to use.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 73 -