Auerswald COMpact 5200 Advanced Information page 583

Transfert d'appel
Important: In Switzerland, the configuration of a call forwarding is
chargeable. To avoid costs, the check box must be disabled.
Delay time for Call Forwarding on no reply in the PBX
This delay time for external numbers specifies the time (in seconds) after
which a call is forwarded if the called subscriber does not respond.
Note: When switched off, the waiting time applies only to call
forwarding that was set up using the PBX. If the network provider has
configured the call forwarding function, the waiting time depends on their
settings and cannot be configured in the PBX.
Routing via exception numbers (VoIP + GSM)
Requirements:
Configured exception numbers (page Routage > Routage VoIP/GSM
•
> Numéros de téléphone d'exception)
• Enabled call forwarding method 2. B channel
The device checks whether the destination number involved in call
forwarding for external numbers has been set up as an exception number.
If so, the call is sent along the configured path. If the destination number
has not been entered in the routing table, the call to be forwarded is sent
either via a free call channel that is assigned to the port or via any free
call channel (For call forwarding via the PBX, use any available call
channel).
SETTINGS FOR CALL FORWARDING METHODS CF/CR/CD FACILITY
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 583 -