Internal Phone Numbers - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Internal Phone Numbers

Internal numbers must be configured for the internal ports so that the

connected end devices are accessible. Each connected end device

receives a subscriber number.

If multiple internal end devices need to be accessible via a phone number,

a common group for the internal subscribers must first be configured.

Internal phone are also needed to make e. g. connections to devices, voip

accounts or functions.

Note: It is a good idea to create a phone numbering plan for the

internal numbers before allocation and then use the following steps to

transmit this to the PBX.

Proceed as follows for configuration:

Create internal phone numbers for subscribers.

Using the Configuration Manager (page Abonnés (Abo) >

Numéros de téléphone)

Create internal phone numbers for groups.

Using the Configuration Manager (page Groupes > Numéros de

Create internal phone numbers for Voice mail and fax boxes.

Using the Configuration Manager (page Périphériques > Boîtes

de messagerie vocale/télécopie > Numéros de téléphone)

Create internal numbers for door stations and announcement outputs.

Using the Configuration Manager (page Périphériques >

Assistant de périphériques)

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r