Ringtones - Auerswald COMpact 5200 Advanced Information

Ringtones

Ringtones
The PBX supports different ringtones for signalling calls on the internal
subscribers. They can be used for example to differentiate internal calls,
external calls via different external numbers, door calls and alarm calls
using the ringtone.
Note: Signalling is carried out by analogue devices as described
(depending on the end device used).
Note: Some end devices (e.g., ISDN phones and wireless, analogue
phones) generate their own call tone/ringtone. For more information, refer
to the description of your end device.
Note: On some system phones the ringtones can be configured based
on the call type or the phone numbers (optional, see phone manual).
Ringtones are displayed on analogue phones as follows:
1 x plus long: 1 long tone (1 second), 4 second pause, ...
3 x plus court: 3 double tones, approx. 1 second pause, ...
1. Tonalité spéciale: Uninterrupted pulsing
2. Tonalité spéciale: Continually repeating double tones (3 double tones
in 5 seconds)
3. Tonalité spéciale: 1 double tone, approx. 4 second pause, ...
4. Tonalité spéciale: 2 short tones, approx. 4 second pause, ...
5. Tonalité spéciale: 2 long tones, approx. 3 second pause, ...
6. Tonalité spéciale: 1 short and 1 long tone, approx. 4 second pause, ...
Alarme: Uninterrupted pulsing
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 132 -