Using An Internal Or External Phone (Remote Access) To Operate And Query A Voice Mailbox - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Using an Internal or External Phone (Remote Access) to Operate and Query a Voice Mailbox

Using an Internal or External Phone (Remote Access)

to Operate and Query a Voice Mailbox

The voice messages of a voice mailbox can be queried by means

of an internal or external phone (remote access). Using various

announcements, the caller is guided through the query menu. Besides

accessing the messages, it is also possible to operate (e. g. switch on and

off) the voice mailbox via phone.

Requirements:

Knowledge of the PIN for accessing the corresponding voice mailbox

DTMF dialling support on the external phone

1. Call the voice mailbox.

Note: Remote access is also possible with disabled readiness of a

voice mailbox. External calls will be accepted after a waiting time of at

least 50 seconds (50 seconds or Waiting time for CF on no reply + 10

seconds if longer than 50 seconds).

2. Dial * and then the user PIN or the PIN for remote access and dial #.

Note: If the internal phone used for the query is the owner of the voice

mailbox, it is not necessary to enter a user PIN or remote access PIN.

Various announcements lead you through the remote access menu.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r