Settings Pbx Base Number/Bundle - Auerswald COMpact 5200 Advanced Information

Settings PBX Base Number/Bundle

Settings PBX Base Number/Bundle
Proceed as follows:
Using the Configuration Manager (page Réseaux publics > RNIS >
•
PBX base numbers/trunk bundle)
Requirements:
• External S
0
• Connection type PTP connection at external S
Numéro de téléphone du système
A PTP connection has a PBX base number (base number, header,
base phone number) and (Direct Dial In - DDI) extension numbers. The
network provider assigns the phone numbers for the connection. The
phone number to be dialled is formed from the PBX base number + (DDI)
extension number.
Nom
For identification of the connection within the PBX.
Extensions block (DDI numbers)
A PTP connection has a PBX base number (base number, header,
base phone number) and (Direct Dial In - DDI) extension numbers. The
network provider assigns the phone numbers for the connection. The
phone number to be dialled is formed from the PBX base number + (DDI)
extension number.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
port (optional, see Technical Data in the Instructions)
0
de À
- 593 -
port