2Bri - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

2BRI

Proceed as follows:

Using the Configuration Manager (page Matériel > Configuration du

Note: If the settings for the module are marked in red, the module is

selected but not inserted.

Note: The numbers under Port correspond to the numbers used on

Set the use of the ISDN ports.

Port is not used and port is not taken into account for the calculation of the

total number of existing ports/call channels.

Port is used as internal S

internal UP0

Port is used as internal U

Port is used as external port.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Do you have a question about the COMpact 5200 and is the answer not in the manual?

Compact 5200r Compact 5500r