Calling A Door And Opening The Door - Auerswald COMpact 5200 Advanced Information

Calling a Door and Opening the Door

Calling a Door and Opening the Door
The PBX supports the connection and control of various types of door
terminals. In addition to a door bell, ringing at the door can in this way
also be indicated by internal or external phones or groups. Each door bell
button can be assigned an individual destination number. You can also
carry out various door functions such as speech connection with the door
and actuation of the door opener from internal phones.
Proceed as follows:
• Using an internal phone
• Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
• Configured door terminal
• Configured relay with operating mode Gâche
Authorisation Ouvrir la porte assigned to subscriber or group
•
1. Pick up the receiver.
Note: During a call, press the Flash key or the Query key.
2. Enter the internal number of the door terminal. Possible entries:
Internal number of the door terminal (for exchange line request type
Direct exchange line phone: with preceding **)
The call connection is immediately established after dialling the phone
number.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 303 -