Settings - Auerswald COMpact 5200 Advanced Information

Settings

Settings
Proceed as follows:
• Separately for VoIP providers
• Using the Configuration Manager (page Réseaux publics > Voice
over IP (VoIP page) > Fournisseur > Configurer)
Note: You can obtain the data for the settings either directly from the
VoIP provider or from suitable lists in the Internet.
Requirements:
• For entering a URL: configured DNS server
• For using a STUN server: IP operating mode IPv4
Fournisseur
Select the provider to be displayed/configured.
Serveur STUN
Requirements:
• IP operating mode IPv4
NAT traversal Enabled with use of STUN
•
A STUN server provides information to subscribers on a private network
on request. This information includes the IP address and port outside their
private network that is viewed as the source of their data. This information
is entered in the requests, instead of the actual private IP address/port.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
Adresse IP ou URL Port
Intervalle pour requête du serveur STUN
- 638 -