Management Groups - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Management Groups

Proceed as follows:

Using the Configuration Manager (page Groupes > Numéros de

Numéro de téléphone

This is an internal number. You can select any of the numbers in

the internal supply of phone numbers. This number is then used for

distributing calls and can be called directly by an internal subscriber.

Nouveau to enter.)

Note: A number cannot be allocated twice.

Note: Using numbers with few digits (two- or three-digit numbers)

inevitably restricts the possible supply of numbers that require more digits.

For example, if the phone number 12 is assigned, the phone numbers 120

to 129 and 1200 to 1299 are no longer available.

Note: The default exchange line access number on the PBX is 0 in the

factory settings. However, this can be changed. Note that changing the

exchange line access number restricts the phone numbering plan.

Freely selectable name. This name is used to identify the group within

the PBX and the connected system phones. The name can also be

transferred to the VoIP end devices via LDAP server.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r