Auerswald COMpact 5200 Advanced Information page 123

Explanations of the Ringing Sequence
•
The following properties can additionally be selected for the ringing
sequence, whereby the ringing sequence Tous restricts the selection for
further properties.
fixed
balancing
rotating
without
rotating
Split Group
without Split
Group
Proceed as follows for configuration:
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
In the case of call forwarding on no reply, the group
call is forwarded to the destination already after the
configured delay time
The order phones are called depends on the assigned
priority.
The order of the called phones depends on a dynamic
priority list. After each call, the phone involved is
placed last.
After the first loop, another one starts. In the second
loop, call waiting is applied to the busy subscribers.
The call is ended by the network provider (after
approx. 2 minutes).
After the first loop, the call is disconnected.
During the ringing pahse, the group must be
available for other callers. The group is split up so
that as many subscribers as possible are available
for each call.
A second caller hears the busy signal (only possible
for Tous).
- 123 -