Auerswald COMpact 5200 Advanced Information page 670

Call Forwarding
has not been entered in the routing table, the call to be forwarded is sent
either via a free call channel that is assigned to the port or via any free
call channel (For call forwarding via the PBX, use any available call
channel).
Utiliser identité en départ en cas de transfert d'appel
Requirements:
• CLIP no screening enabled for this VoIP account
In the case of call forwarding via the external connection, the phone
number of the caller is transmitted to the destination of the call forwarding.
In the case of an anonymous call, the function acts as if not enabled.
Note: When switched off, the phone number in the PBX is transmitted
to the call forwarding destination.
CALL FORWARDING UNCONDITIONAL (CFU)
Transfert d'appel disponible dans la ligne
If the exchange line has a CFU, this function can be enabled.
Note: If the exchange line does not have a CFU, this function must be
disabled.
Keypad-/Registro code: Enable CFU
Keypad-/Registro code: Disable CFU
The feature codes specify the character strings the VoIP network provider
requires to execute a service feature on the VoIP connection
Possible entries:
Digits: 0 to 9
•
• The * and # characters
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 670 -