Auerswald COMpact 5200 Advanced Information page 811

Basic Settings
call was not accepted, although all logged-in members of the group were
called, the call would be finished with a busy signal.
Tous - groupe fractionné
The call is handled almost similar to the ringing sequence Tous. The
only difference is the way multiple calls to the group are handled: If the
group receives further calls during an active call, the group will be split
into several smaller groups ringing for a specific active call. But there
will never ring more calls in the group than the number of free available
group members. Additional calls will be rejected with a busy then. If a call
is accepted the other phones ringing so far for this call are assigned to
the other pending calls and will immediately start to ring again. If a group
member finishes a call, this subscriber will immediately ring again for
the pending calls. The timer for the configured delay time (après) starts
after receiving the first call to the group and will not restart for additional
incoming calls.
Linéaire - fixe - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (après) another single group member will be called. The order of
calls depends on the configured Priorité. If a call was not accepted,
although all logged-in members of the group were called, the call would be
finished with a busy signal.
Linéaire - compensé - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (après) another single group member will be called. The order of the
calls depends on the configured Priorité: First of all the member of the
group first logged-in gets the position 1 in the order of calls, the second
one the position 2, ... . If position 1 takes a call, the second call will be
assigned to position 2. The member of the group with the position 1 will
get the last position in the order for a future call after he has finished the
current call. If a call was not accepted, although all logged-in members of
the group were called, the call would be finished with a busy signal.
Linéaire - fixe - rotatif - groupe fractionné
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 811 -