Initiating Calls With Project Assignment - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Initiating Calls with Project Assignment

The exchange line access with project assignment allows the sorting

of external calls to a specific project/customer/client. With call data

management, the charges and the time expenditures may be assigned to

different projects/customers/clients.

Proceed as follows:

Using a character string on the internal phone

Using the menu/function key on a system phone (optional, see the

phone manual)

Requirements:

Assigning of project numbers function enabled (optional, see

1. Pick up the receiver.

2. Dial ##93.

3. Enter the 2- to 6-digit project number.

5. Enter an external number. Possible entries:

External number (for exchange line request type Internal phone: with

preceding exchange line access number)

Short code number (for exchange line request type Direct exchange

line phone: with preceding **)

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r