Initiating InterCom Announcement/Hands-Free
Initiating InterCom Announcement/Hands-Free
The InterCom function enables an announcement to system phones (one
phone or group) from any internal phone without someone having to
actively receive a call (for example, in a doctor's office).
Furthermore, the caller's system phone can be programmed to switch
on the microphone in addition to the loudspeaker (hands-free) so that a
person nearby can speak with the caller using this intercom system.
Proceed as follows:
•
Using a character string on the internal phone
•
Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
•
Enabled InterCom authorisation at the InterCom destination
1. Pick up the receiver.
2. Dial one of the following character strings:
##011: Initiates an InterCom announcement.
##012: Initiates InterCom hands-free.
3. Enter the internal number of the system phone. Possible entries:
Internal number of the individual system phone (for exchange line
request type Direct exchange line phone: with preceding **)
The system phone automatically takes the call after a single ring.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 305 -