Configuring External Internet Telephony - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Configuring External Internet Telephony

Requirements:

External VoIP channel (optoptional, see Technical Data in the

Instructions)

An account with a VoIP provider

Configured internal subscribers

Configure the PBX as follows:

1. Configure at least one VoIP channel as an external VoIP channel.

2. Make sure you have current VoIP provider data:

Check previously configured provider data.

Download and import provider data from the Internet.

Enter provider data manually.

3. Configure the DNS server.

4. Create at least one VoIP account in the PBX and enter the account

and access data.

5. Enter your own VoIP phone numbers.

6. Set up call distribution (for incoming calls).

7. If necessary, enable DiffServ in order to increase VoIP call quality.

8. Check whether the registration of the VoIP account was successful

(Surveillance > Statut comptes VoIP).

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Do you have a question about the COMpact 5200 and is the answer not in the manual?

Compact 5200r Compact 5500r