Auerswald COMpact 5200 Advanced Information page 725

Reachability
Paramètres
External calls to the subscriber are forwarded. Internal calls are not
forwarded.
Paramètres
If call forwarding has been configured for the internal destination of an
existing call forwarding, it is possible to reroute already forwarded calls
(cascading).
Calls also will be rerouted to the new call forwarding destination. During
cascading, the PBX memorises the subscribers who have already been
called for this call. If the subscriber is the destination of a call forwarding
again, the call ends with the previous destination.
The caller hears the dial tone until the call is accepted. If the destination
is busy or the maximum call duration has been reached, a busy signal is
issued.
Note: When switched off, cascading does not take place. Calls end
with the entered destination.
Paramètres
Calls directed to a group in which the subscriber is logged in as incoming
will be forwarded to the CF destination of the subscriber.
Transf. immédiat
Internal and external calls to the subscriber are forwarded immediately to
the entered destination number.
Transf. si occupé
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
appels externes uniquement
Transfert en cascade
Transf. si appel par un groupe
Numéro de téléphone composé
Numéro de téléphone composé
- 725 -