Configuring Isdn System Phones Via The Pbx (Internal) - Auerswald COMpact 5200 Advanced Information

Configuring ISDN System Phones via the PBX (Internal)

Configuring ISDN System Phones via the PBX
(Internal)
Requirements:
• PBX with internal ISDN system phones
• In the PBX configured configuration port for system phones (page
Administration > Configuration IP)
• Internet connection
• Installed COMfortel Set configuration software version 3.0, or later
• Knowledge of the user, sub-admin or admin PIN
1. Start COMfortel Set.
2. Click Options > Interface....
3. Select Interface > IP network, enter the IP address of the PBX and
under IP port (Default: 7002) the configuration port for system phones
on the PBX.
4. Click OK.
5. Open the menu File > Open > Telephone.
6. Double-click on the PBX symbol displays all connected system
phones. Select the phone whose configuration you want to open and
click OK.
7. Select the desired Authorisation level.
8. Enter the associated PIN and click OK.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 78 -