Signalling Tones - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Signalling Tones

Proceed as follows:

Using the Configuration Manager (page Réseaux publics > Indicatif)

Note: Some of the following settings can also be configured seperately

for connections/accounts.

Tonalité d'appel

Tonalité d'occupation

Depending on the location of the PBX, the signalling tones are

correspondingly preconfigured but they can also be changed. For these

tones, only the frequencies 400, 425, 440 and 450 Hz are possible. Tones

differing from these frequencies are rounded to the nearest frequency.

Note: Do not change the preconfigured values for dial tone, ringer and

busy tone unless you are told to do so by our support staff.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r