Taking Over A Call (Call Take-Over) - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Taking over a Call (Call Take-over)

If the answering machine has already taken the call, you can perform a

call take-over to take the call on your own phone.

Proceed as follows:

Using a character string on the internal phone

Using the menu/function key on a system phone (optional, see the

phone manual)

Requirements:

Transfert d'appel enabled for the subscriber

To perform call take-over of an external call: Discrimination assigned

to the subscriber for incoming calls (International, National, Localité

or Entrants uniquement, avec appel d'urgence)

If the answering machine has already taken the call, proceed as follows:

1. Pick up the receiver.

Note: During an existing call press the Flash key or the Query key.

2. Dial ##06.

3. Enter the internal number of the answering machine that is conducting

the call to be picked up. Possible entries:

Internal number of the individual answering machine (for

exchange line request type Direct exchange line phone: with preceding

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r