Loudspeaker Announcements - Auerswald COMpact 5200 Advanced Information

Loudspeaker Announcements

Loudspeaker Announcements
Proceed as follows:
Using the Configuration Manager (page Périphériques > Relais
•
(actionneurs) > Configurer)
Configuration du relais
Select the relay.
Commande d'arrêt
Requirements:
• Created relay
The PBX will switch off relays with the operating modes Light, Door
opener, Alarm and PC relay after the specified switching duration.
Note: When switched off, the hold time of the relay will be used. The
PBX does not actively switch off the relay.
Note: As a a pre-requisite, off control must be supported by the relay
(for some relays, e. g. the a/b Switching Modules, switching off cannot be
controlled).
Plages horaires
The switching duration of a relay specifies after how many seconds the
PBX will switch off the relay. Possible entries: 0 to 6000 (0 only for manual
relays).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 937 -