Baby Call - Auerswald COMpact 5200 Advanced Information

Baby Call

Baby Call
The baby call function provides a service in which after a configured delay
time after picking up the receiver, a phone number is automatically dialled
to call an internal or external subscriber. This means, no key needs to be
pressed. However, if a phone is dialled manually within the configured
delay time, it has priority. It must be noted that on some phones, the
numbers dialled are not sent immediately when the keys are pressed
(often there is approx. a half second delay).
Note: The baby call function is not available for VoIP phones.
Proceed as follows for configuration:
• Switching the baby call function on.
Using the Configuration Manager (page Abonnés (Abo) >
-
Propriétés > Paramètres)
- Using a character string on the internal phone (see
Hotline)
• Configuring the baby call function configuration dependent.
Using the Configuration Manager (page Abonnés (Abo) > Profils
-
> ... > Paramètres)
• If necessary, configuring special dial tone for baby call.
- Using the Configuration Manager (page Abonnés (Abo) >
Propriétés > Paramètres)
• Configuring delay time for baby call.
- Using the Configuration Manager (page Abonnés (Abo) > Tous
les abonnés)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 61 -
Baby Call/